Seachem

Seachem Reef Glue is a superior bonding gel, powerful and versatile enough for a wide variety of aquarium applications. Use for aquascaping, repairing plastics, and gluing or mounting coral frags to reef rock. It bonds within seconds for excellent control and ease of use.

• Superior cyanoacrylate gel for aquarium applications
• Bonds within seconds for excellent control, hold and durability
• Use for aquascaping, repairing plastics and mounting coral frags
• Can be used underwater
• Suitable for fresh and saltwater

Reef Glue comes in an aluminum tube for extended life and stability, beyond that of products contained in plastic bottles. Will not dry in tube.

Directions: To adhere frags, colonies, or for general aquascaping, first test fit the item to be glued onto the site it is to be adhered. Note the contact points the item has with the site. Retrieve the item and, while not submerged, place a small amount of glue on each site contact point. Quickly fit the item onto the site again. A skin will form over the glue upon contact with water. It is helpful to break this skin slightly while in contact with the site. Hold the item down for about 15 seconds (more in areas of strong flow). Check that the item is secure. Repeat as necessary in order to build up a small amount of glue for a more secure hold.

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Ammonia Alert is an innovative color device for continuously detecting and monitoring free ammonia in aquariums. A sensor changes from yellow to green to blue, relative to the ammonia concentration in the water. Seachem Ammonia Alert detects less than 0.05 mg/L (ppm) free ammonia and alerts you before fish show any signs of stress. It lasts over a year and replacement sensors are available.

• Easy visual gauge to monitor ammonia in your reef or fish tank
• Use in saltwater or freshwater aquariums
• Provides 1 year of ammonia detection

In the absence of free ammonia the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to register a SAFE reading.

Seachem Betta Basics is formulated to create the ideal bowl environment for both your bettas and plants. It works by removing any chlorine, chloramine and detoxifies ammonia. It also buffers the water to a pH of 7.0 to provide a healthy environment for fish and plant.

• Removes Any Chlorine, Chloramine, And Ammonia
• Buffers water to a pH of 7
• Creates ideal environment both bettas and plants

Seachem live bearer/brackish aquarium salt is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting on aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For low range pH control Use Acid buffer, discus buffer, South American Cichlid buffer 4. 5, or Acid regulator. Use neutral regulator, Central American Cichlid buffer or South American Cichlid buffer 7. 0 for neutral pH. For high range pH control Use alkaline regulator, alkaline buffer or Tanganyika buffer.

• A chemically sound blend of salts designed to replicate native environment of live bearers and other brackish estuary fish
• Designed to function without adversely impacting on aquatic plants when used at regionally specific recommended dosage
• Well suited for routine Aquarium freshwater dosage
• Does not impact pH or provide buffering
<

Cichlid Trace supplies a broad range of trace elements demonstrated to be necessary for proper sh health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Cichlid Trace contains only those elements actually demonstrated to be required by fish.

Seachem Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity is the only clarifier on the market that does it all!

• Water clarifier for fresh and saltwater aquariums
• Helps clear cloudy water fast
• Safe for use in live plant and reef tanks

Seachem Clarity will clear all types of clouding, including: bacterial and other biological type blooms, chemical clouding, and particulate clouding (i.e. stirred up gravel bed). When Clarity clears up bacterial clouding it helps to accelerate and enhance the colonization of the biological filter by efficiently relocating these natural biofilms to the biosupport media in the filter.

Directions: Use 1 capful (5 mL) for every 20 gallons. In some situations the cloudiness may increase slightly after adding Clarity, however this is normal and is a sign that Clarity is actively working. Rapid clarification will follow.

Seachem Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity is the only clarifier on the market that does it all!

• Water clarifier for fresh and saltwater aquariums
• Helps clear cloudy water fast
• Safe for use in live plant and reef tanks

Seachem Clarity will clear all types of clouding, including: bacterial and other biological type blooms, chemical clouding, and particulate clouding (i.e. stirred up gravel bed). When Clarity clears up bacterial clouding it helps to accelerate and enhance the colonization of the biological filter by efficiently relocating these natural biofilms to the biosupport media in the filter.

Directions: Use 1 capful (5 mL) for every 20 gallons. In some situations the cloudiness may increase slightly after adding Clarity, however this is normal and is a sign that Clarity is actively working. Rapid clarification will follow.

Seachem Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity is the only clarifier on the market that does it all!

• Water clarifier for fresh and saltwater aquariums
• Helps clear cloudy water fast
• Safe for use in live plant and reef tanks

Seachem Clarity will clear all types of clouding, including: bacterial and other biological type blooms, chemical clouding, and particulate clouding (i.e. stirred up gravel bed). When Clarity clears up bacterial clouding it helps to accelerate and enhance the colonization of the biological filter by efficiently relocating these natural biofilms to the biosupport media in the filter.

Directions: Use 1 capful (5 mL) for every 20 gallons. In some situations the cloudiness may increase slightly after adding Clarity, however this is normal and is a sign that Clarity is actively working. Rapid clarification will follow.

Seachem CoralCrete Epoxy Adhesive securely attaches coral to decorative rockwork in freshwater, marine and reef aquariums. This two-part epoxy putty may also be used to fuse together a stable rockwork foundation for future coral growth. Available in gray or purple, CoralCrete is a must-have for aquariums with branching, polyp, or plating corals.

• Secures coral to rockwork
• Fully cures submerged or emerged within 24 hours
• Matches synthetic reef rock
• Safe for marine & freshwater aquariums

Directions: For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved. Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to ensure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over-activate during cure time.

Note: There is no functional difference between the purple and gray epoxies. Choose whichever color best matches your rock and coral coloring.

Seachem CoralCrete Epoxy Adhesive securely attaches coral to decorative rockwork in freshwater, marine and reef aquariums. This two-part epoxy putty may also be used to fuse together a stable rockwork foundation for future coral growth. Available in gray or purple, CoralCrete is a must-have for aquariums with branching, polyp, or plating corals.

• Secures coral to rockwork
• Fully cures submerged or emerged within 24 hours
• Matches synthetic reef rock
• Safe for marine & freshwater aquariums

Directions: For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved. Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to ensure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over-activate during cure time.

Note: There is no functional difference between the purple and gray epoxies. Choose whichever color best matches your rock and coral coloring.