Seachem

Seachem CoralCrete Epoxy Adhesive securely attaches coral to decorative rockwork in freshwater, marine and reef aquariums. This two-part epoxy putty may also be used to fuse together a stable rockwork foundation for future coral growth. Available in gray or purple, CoralCrete is a must-have for aquariums with branching, polyp, or plating corals.

• Secures coral to rockwork
• Fully cures submerged or emerged within 24 hours
• Matches synthetic reef rock
• Safe for marine & freshwater aquariums

Directions: For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved. Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to ensure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over-activate during cure time.

Note: There is no functional difference between the purple and gray epoxies. Choose whichever color best matches your rock and coral coloring.

SeaChem Cupramine is superior to copper sulfate, chloride and citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. Seachem Cupramine is superior to traditional chelates: it is fully charged (ionic), active at low concentrations, and is can be removed from your water with carbon.

• Buffered active copper
• For marine or freshwater
• Less toxic, superior to and safer than copper chlorides, sulfates, citrates and chelates

SeaChem Cupramine is superior to copper sulfate, chloride and citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. Seachem Cupramine is superior to traditional chelates: it is fully charged (ionic), active at low concentrations, and is can be removed from your water with carbon.

• Buffered active copper
• For marine or freshwater
• Less toxic, superior to and safer than copper chlorides, sulfates, citrates and chelates

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

When precision matters, the Seachem Digital Spoon Scale is the perfect companion tool for the serious aquarist. Accurate and easy to use, it will ensure precise dosing of any chemical or supplement up to 300 grams in 0.1 increments. The LCD display will display results in either grams or ounces and can be switched at the push of a button. It is corrosion resistant and colored to resist stains.It runs on 2 AAA batteries (included) with an easy-access battery compartment.

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Discus trace supplies a broad range of trace elements demonstrated to be necessary for proper sh health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Discus trace contains only those elements actually demonstrated to be required by fish.

• Discus Specific
• Restores Nutrients
• No Sodium

Made of melamine foam, the Seachem DuoPad features Micro Abrasive Technology with Added Durable Scrubbing Surface to make cleaning your aquarium a cinch. It is safe for glass and acrylic aquariums and includes no soaps or detergents. The SeaChem DuoPad also effectively removes algae from scratches.

Equilibrium is specifically designed to establish the ideal mineral content for the planted aquarium. Equilibrium contains no sodium or chloride (which can be detrimental to a planted aquarium at elevated levels). Equilibrium is ideally suited for use with RO (reverse osmosis) or DI (deionized) water or any mineral deficient water. Equilibrium raises the essential mineral/electrolyte content (General Hardness) of the water to balance with and promote stability of the carbonate hardness. To maintain KH, we recommend Alkaline Buffer. Equilibrium contains NO SODIUM CHLORIDE. Both sodium and chloride are not rapidly depleted elements in a planted aquarium, and, in the case of chloride, can do more harm than good. Also, sodium is not a contributing cation to GH levels. Equilibrium contains only calcium, magnesium, and potassium salts, which aid in fish metabolism but are also highly beneficial to plant growth. Equilibrium guaranteed analysis and symptoms of deficiency

• Restores and Maintains Mineral Balance and GH
• Contains No Sodium or Chloride
• Fast Dissolving Powder Repaces Minerals for Healthy Plant Growth
• Reverse Osmosis Water Conditioner for Freshwater Planted Aquariums
• Made in the USA

INSTRUCTIONS: To raise mineral content/general hardness (GH) by 1 meq/L (3 dH), add 16 g (1 tablespoon) for every 80 L (20 US gallons) when setting up an aquarium or when making water changes (add to new water). For optimum solubility, we recommend mixing with 1 L (1 qt.) of water (the resulting mixture will have a white opaque appearance). When this mixture is added to the aquarium it will impart a slight haze that should clear within 15-30 minutes. HINTS: Do not use Equilibrium when replacing evaporated water. This dose is based on DI or RO water; for other water, measure hardness (GH) first, then add according to need. For precise dosing, use the Seachem Digital Spoon Scale. Plant preferences vary, but a general guide is about 1-2 meq/L (3-6 dH) or match the existing or target carbonate hardness (KH), which, ideally, is also about 1-2 meq/L (3-6 dKH). Equilibrium will compact with age, but remains effective.

INGREDIENTS: Amounts per 1g Calcium (Ca) (min) 155 mg calcium (Ca) (max) 160 mg Magnesium (Mg) (min) 8 mg strontium (Sr) (min) 0.16 mg

Seachem Filter Socks remove suspended particulates from the water column down to 100 microns, providing exceptional purity and water quality. These socks are built to last, with durable welded seams and a singed finish to reduce wear and prevent the reintroduction of debris to your aquarium.

• Unparalleled particulate removal for outstanding water quality
• Durable welded seams reduces wear
• 100 micron rating traps even the smallest debris
• Plastic collar fits standard sump fittings for easy installation

100 Micron Rating. One micron is on millionth of a meter (or one thousandth of a millimeter). These socks have a mesh size of 100 microns, allowing them to trap even the smallest particles and debris.

Easy Installation and Maintenance. Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.

Sizing:
Small: 10 x 30 cm / 4" x 12" (10 cm / 4' plastic collar)
Large: 17.5 x 40.5 cm / 7" x 16" (17.5 cm / 7" plastic collar)

Seachem Filter Socks remove suspended particulates from the water column down to 100 microns, providing exceptional purity and water quality. These socks are built to last, with durable welded seams and a singed finish to reduce wear and prevent the reintroduction of debris to your aquarium.

• Unparalleled particulate removal for outstanding water quality
• Durable welded seams reduces wear
• 100 micron rating traps even the smallest debris
• Plastic collar fits standard sump fittings for easy installation

100 Micron Rating. One micron is on millionth of a meter (or one thousandth of a millimeter). These socks have a mesh size of 100 microns, allowing them to trap even the smallest particles and debris.

Easy Installation and Maintenance. Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.

Sizing:
Small: 10 x 30 cm / 4" x 12" (10 cm / 4' plastic collar)
Large: 17.5 x 40.5 cm / 7" x 16" (17.5 cm / 7" plastic collar)

Seachem Flourish Advance is an all natural growth enhancer for live aquarium plants, with an enhanced formula that uses phytohormones, minerals, and nutrients to stimulate dramatic growth in roots and shoots. When used regularly, it also heightens mineral absorption and disease resistance.

• Natural phytohormone supplement for the planted aquarium
• Dramatically stimulates the growth of roots and shoots in aquatic plants
• Enhances mineral absorption and improves disease resistance
• Non-toxic and completely safe for all plants, fish and aquatic organisms

What makes it special Phytohormones give Flourish Enhance an edge over other aquarium plant growth enhancers. They are naturally occurring compounds that play important roles in regulating plant growth in a wide variety of processes, including cell division, formation and activity of shoot meristems, induction of photosynthesis gene expression, leaf senescence, nutrient mobilization, seed germination, root growth, and stress response.

For ten to fourteen days after application, Flourish Advance stimulates root growth beneath the surface. After this initial induction period, significantly enhanced growth in the leaves and stems of the plants will occur.

Directions: Shake well before use. Use 1 capful (5 mL) for every 80 L (20 gallons). Dose daily or as required to maintain plant growth.