Seachem

Seachem Reef Dip Coral Disinfectant contains elemental iodine complexed to a protective slime coat for safely and gently disinfecting corals. Can used prophylactically (without evidence of disease) or to remedy diseased specimens. It is effective against bacteria, fungus, and protozoans. Safe to use with both stony and soft corals, also safe for anemones and polyps.

• Effective against bacteria, fungus, and protozoans
• safe for stony and soft corals, anemones and polyps
• May be used without evidence of disease or to remedy diseased specimens

Ingredients: Aqua (water), Alumininum Chlorohydrate, Alcohol Denat, Propylene Glycol, Phenoxyethanol, Methylparaben, Ethylparaben, Propylparaben, Butylparaben.

Seachem Reef Fusion 1 provides your corals with 100,000 mg/L of ionic calcium, as well as biologically appropriate levels of magnesium, strontium, boron, manganese, and molybdenum. This ionic calcium supplement will bond with a variety of particles in your aquarium, helping your corals receive the necessary calcium for healthy growth.

• Provides 100,000 mg/L ionic calcium for coral growth
• Provides biologically appropriate levels of magnesium, strontium, boron, iron, manganese and molybdenum
• 2-part Reef Fusion system maintains calcium and alkalinity levels

Reef Fusion 1, when used in conjunction with Seachem Reef Fusion 2, creates a powerful system that helps maintain healthy levels of calcium and alkalinity.

Directions: Dose aquarium every 1-2 days. Shake well before using. Add 1 ml of Reef Fusion 1 per 25 L (6.5 US gallons) of water. (For reference purposes, the cap holds 5 ml.) Add this to a high current area of the tank. Wait a few minutes, then add Reef Fusion 2 in the same manner, 1 ml per 25 L (6.5 US gallons), after shaking well. It is preferred that the two products be added to separate locations in the tank. This dose contributes 4 mg/L of calcium, and 0.176 meq/L of alkalinity. Never mix Reef Fusion 1 with Reef Fusion 2 directly.

Note: Do not exceed a dose of 4 ml in 25 L (6.5 US gallons) per day of each product.

Maintain calcium level between 410-430 mg/L. Maintain alkalinity between 4-6 meq/L. Size or frequency of dose may be increased if dosing regimen is insufficient to maintain calcium and alkalinity in these ranges.

Ingredients: Calcium Chloride, Magnesium Chloride, Strontium Chloride, Rubidium Chloride, Sodium Tetraborate, Iron Chloride, Sodium Molybdate, Manganese Sulfate.

Guaranteed Analysis:
Calcium (min) - 95 mg; (max) - 105 mg
Magnesum - 5 mg
Strontium - 0.1 mg
Boron - 0.020 mg
Iron - 0.0005 mg
Manganese - 0.0001 mg
Molybdenum - 0.0005 mg
Rubidium - 0.014 mg

Seachem Reef Fusion 2 is specially formulated to supply your tank with the essential carbonates, bicarbonates and alkalinity to help your corals grow. This is the second of the Reef Fusion system that helps maintain proper alkalinity for a healthy live reef environment.

• Maintains proper alkalinity levels for healthy coral growth
• 2-part Reef Fusion system maintains calcium and alkalinity levels
• Supplies tank with needed carbonates, bicarbonates and alkalinity

Reef Fusion 2 contains a mixture of carbonates and bicarbonates at an alkalinity of 4400 meq/L. It is designed to restore and maintain alkalinity in the reef aquarium and provide calcareous species with the essential carbonate needed for growth.

Directions: Dose aquarium every 1-2 days. Shake well before using. Add 1 ml of Reef Fusion 1 per 25 L (6.5 US gallons) of water. (For reference purposes, the cap holds 5 ml.) Add this to a high current area of the tank. Wait a few minutes, then add Reef Fusion 2 in the same manner, 1 ml per 25 L (6.5 US gallons), after shaking well. It is preferred that the two products be added to separate locations in the tank. This dose contributes 4 mg/L of calcium, and 0.176 meq/L of alkalinity. Never mix Reef Fusion 1 with Reef Fusion 2 directly.

Note: Do not exceed a dose of 4 ml in 25 L (6.5 US gallons) per day of each product.

Maintain calcium level between 410-430 mg/L. Maintain alkalinity between 4-6 meq/L. Size or frequency of dose may be increased if dosing regimen is insufficient to maintain calcium and alkalinity in these ranges.

Seachem Reef Iodide is an important element required by invertebrates and many soft corals (gorgonians, sarcophytons, etc). Reef Iodide is a concentrated (8,000 mg/L) stabilized potassium iodide source for reef aquaria that will restore and maintain iodide levels to those found in natural seawater.

• Raises Iodide levels in reef aquariums to levels found in natural sea water
• Reef iodide contains no toxic iodide, only safe iodide
• Reef Iodide is important for the essential growth of soft tissue

Reef Iodide is formulated to provide a safe and easy-to-use source of iodide that will not convert to toxic-free iodine under storage or reef conditions.

DIRECTIONS: For beginner use, add 5 mL (1 capful) for each 200 L (US 50 gallons) every other day.

Reef Phytoplankton is a concentrated blend of green and brown marine phytoplankton designed to provide the essential fatty acids, proteins, vitamins, and amino acids, with biological carotenoids for an invertebrate diet. Size ranges from 1-20 ?m to feed a broad range of tropical marine aquarium filter feeders and invertebrates.

• Reef Phytoplankton is a concentrated blend of green and brown marine phytoplankton
• Phytoplankton size ranges from 1-20 ?m
• Enhanced to increase the bioavailability of important nutrients

IReef Phytoplankton contains a natural source of carotenoids which provides essential proteins as well as a more bioavailable source of pigmentation when compared to other natural sources and synthetic pigments. Carotenoids provide the extra benefit of antioxidant activity. In addition, Reef Phytoplankton is enhanced to increase the bioavailability of important nutrients such as proteins, lipids, B vitamins, and other organic pigments, thus, corals expend less energy to derive the nutritional benefit. It is blended to contain the proper ratio of fatty acids, carbohydrates, and proteins. Blending phytoplankton yields better nutritional value. Studies show increased consumption of phytoplankton in filter feeders when using mixed cultures versus a single culture of phytoplankton.

DIRECTIONS: Shake well before using. Add 1 capful (5 mL) per 200 L (50 US gallons) of water twice weekly or as required to maintain coral growth. For best results, dose directly to the aquarium; target feeding can overwhelm corals and have a negative impact. Refrigeration after opening is recommended, but not required.

Seachem Reef Plus is a full spectrum reef supplement containing trace elements, vitamins, and amino acids demonstrated to have a positive impact on the growth of corals and other desirable reef creatures.

• Concentrated vitamin and amino acid supplement
• Use 10mL for every 40 gallons of saltwater
• For saltwater aquarium use only

Seachem Reef Plus is formulated to provide nutrients available from natural tropical reef waters. Contains vitamin B12, vitamin C, thiamine, inositol, choline, iodide, and other essential constituents at pH 8.3. Reef Plus is nitrate/phosphate free.

Reef Strontium's addition to reef aquariums aids the growth of corals, coralline algae, and other organisms that lay down a calcareous skeleton or shell, including tridacnid clams. Reef Strontium is intended to restore and maintain strontium to levels found within natural seawater without affecting pH. Strontium is utilized in the same manner as calcium and holds a similar importance in maintaining a vigorous level of growth.

• Seachem Reef Strontium aids in healthy growth of corals and coralline algae
• Restores and maintains strontium in reef aquariums
• Gluconate complexation provides a rich source of metabolic energy

Reef Strontium contains 10,000 mg/L of available strontium as a gluconate complex. Gluconate complexation offers several benefits: it increases the bioavailability of the strontium, it provides a rich source of metabolic energy to help maintain peak coral growth, and it inhibits strontium precipitation/alkalinity depletion. Gluconate does not contain nitrogen or phosphorus, making it biologically impossible for it to lead to algae growth in a properly maintained reef system.

DIRECTIONS: Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week.

Reef Trace supplies a broad range of trace elements demonstrated to be necessary for proper reef health and growth. Trace elements are normally depleted by utilization, oxidation, and precipitation. The latter two processes occur more rapidly than with other micronutrients. This makes it important to restore trace elements on a regular basis. Reef Trace may be used alone or in conjunction with Reef Plus. The best results are obtained when both are used. Reef Trace is nitrate/phosphate free.

• Reef Trace supplies a broad range of trace elements
• Reef Trace may be used alone or in conjunction with Reef Plus
• Reef Trace is nitrate/phosphate free

Replenishment of a number of trace elements is required to maintain an environment ideal for the growth and reproduction of marine life, but while the importance of trace elements has been recognized by aquarists for many years, the physiological reasons are not fully understood. The chemical elements in seawater are varied, and, likewise, their addition to the aquarium in trace quantities has varied effects on a variety of saltwater plants and invertebrate species. In general, though, these elements are important for metabolic processes and pigment formation.

DIRECTIONS: Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. When used in conjunction with Reef Plus, dose on alternate days.

Seachem Reef Zooplankton is a concentrated blend of marine zooplankton that contains no added dyes or synthetic pigments. This natural source of carotenoids for colorations provides essential fatty acids, proteins, vitamins and amino acids for coral growth.

• Unique blend of marine zooplankton
• Stimulates coral growth
• Provides important nutrients
• Contains a natural source of carotenoids for colorations

Reef Zooplankton is enhanced to increase the bioavailability of important nutrients, which helps corals expend less energy to derive nutritional benefit.

Directions: Shake well before using. Use 5 mL for every 190 L (50 US gallons) of water twice weekly or as required to maintain coral growth. (For reference purposes, the cap holds 5 mL.) Refrigeration after opening is recommended, but not required.

Ingredients: Fenneropenaeus chinensis, Artemia, Rotifer, Protein Hydrolysates with carotenoids, Ascorbic Acid, Citric Acid, Carboxylic Acid, Sodium Benzoate, Methylparaben, Propylparaben.

Guaranteed Analysis:
Protein (min) - 2.0%
Crude Fat (min) - 0.35%
Crude Fiber (max) - 0.5%
Moisture (max) - 96.0%
Ash (max) - 1.5%

Seachem Replenish is specially designed to replenish physiologically needed minerals that have been removed during reverse osmosis or deionizing filtration.

• Designed to replenish physiologically needed minerals
• Restore General Hardness (GH) using "soft" and "hard" salts
• Helps prevent sudden death due to osmotic stress

Replenish will restore General Hardness (GH) using "soft" and "hard" salts. This special blend of salts will help prevent sudden death due to osmotic stress which causes osmotic shock.

Dosage: 500 ml (16.9 oz) treats 1,000 gallons.

Directions: Add 5 mL (1 capful) Replenish to 10 Gallons to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 5-10 gallons.

Seachem Safe Powder is a concentrated dry conditioner for freshwater and saltwater aquariums. This concentrated conditioning powder removes chlorine and chloramine from tap water, detoxifies nitrite and nitrate, and converts ammonia into a safe, non-toxic form for more efficient removal by the biofilter.

• Removes chlorine, chloramine and ammonia from water
• Detoxifies nitrite and nitrate
• Non-acidic, highly effective dry conditioner for fresh and saltwater

Seachem Safe Powder will not impact pH levels or overactivate skimmers. It may be used during tank cycling to alleviate ammonia/nitrite toxicity, during start-up or whenever adding or replacing water.

Note: Safe is the dry version of Seachem Prime and shares all of its advantages; however, Safe is even more concentrated than Prime.

Directions for Use:
Note: These directions supersede all other prior packaging.

Directions for 10 g and 50 g:
Use 100 mg Safe (scoop) per each 100 L (25 gallons) as needed to reduce chlorine and chloramine or per 25 L (6 gallons) for ammonia.

Directions for all other sizes:
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 gallons) for ammonia.

May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that won't crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

• High quality silicone sealant
• 100% RTV silicone
• Suitable for freshwater and saltwater aquariums
• Won't crack, dissolve or shrink
• Provides a watertight seal

The sealant is black in color and comes in a 3 oz tube

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that won't crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

• High quality silicone sealant
• 100% RTV silicone
• Suitable for freshwater and saltwater aquariums
• Won't crack, dissolve or shrink
• Provides a watertight seal

The sealant is clear in color and comes in a 3 oz tube

Seachem Zip Bags are secure filter bags that feature durable seams and a corrosive-proof zipper.

• Easily Holds 1 Liter of Filter Media
• Durable Seams
• Corrosion-Proof Zipper
• No Strings or Ties
• 12.5" x 5.5" Ideal for Resins & Small Filter Media

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.